LABOSTAR PRO TWF UV
|Minimum Order Quantity||1 Piece|
|Type Of Machines||RO, UV, Ultra Filtration|
|Installation Services Required||Yes|
FROM TAB WATER TO ULTRAPURE WATER - ONLY ONE INNOVATIVE STEP
The LABOSTAR PRO TWF UV
systems produce ultrapure water straight from your drinking water supply. This equipment incorporates a pre-filtration unit and a reverse osmosis membrane. The pure water collects in an integrated tank and is finally circulated through the polishing module by a circulation pump. The user can extract either type III water from built-in 7L storage tank or type I water from dispenser with a quality of 0.055 µS/cm, equivalent to 18.2MΩ-cm, and TOC of between 1 and 10 ppb, depending on system type. The RO water quality is displayed as well. This equipment can cost effectively produce small amount of analytical-grade water. The water quality exceeds all relevant standards including ASTM Type I, CLSI and ISO 3696 Type I. System can be upgraded with 30 or 60l water tank.
A conductivity sensor constantly measures the product water purity in the recirculation loop. A positively charged 0.2 µm sterile filter at the dispenser removes bacteria and endotoxins,eliminating the need for an expensive ultra filter. An uncharged 0.2 µm sterile filter is also available. This system are delivered with the first set of modules and filters.
Type III Water Specifications :
Flow rate @25° C : 9 l/h
Flow rate @20° C : 8 l/h
Flow rate @15° C : 7 l/h
Rejection rate for ions : 98 max
Rejection rate for bacteria : >99
Rejection rate for particles : >99
Type I Water Specifications :
Output up to : 1.2 l/min
Conductivity @25° C : 0.055 µS/cm
Resistivity @25° C : 18.2 MΩ-cm
TOC : 1-5 ppb
Bacteria : <1 cfu/ml
Endotoxins <0.001 EU/ml
Particles > 0.2 µm : <1 per ml
Feed Water Specifications :
Pressure : 3 - 5 bar
Conductivity : <1400 µS/cm
Colloid Index : <3 SDI
Free Chlorine : <0.5 mg/l
Fe : <0.1 mg/l
Co2 max : 15 mg/l
Water Temperature : 5 - 30° C
Ambient Temperature : 5 - 35° C
Raw Water : R = 5/16' push-in / flex tubes
Pure Water : D = 1/4' push-in / flex tubes
Drain Concentrate : 3/8' puch-in / flex tubes
Power Requirements :
Power Consumption : 270W
Power Supply : 100-240V / 50-60Hz
Height : 535mm
Width : 400mm
Depth : 520mm
- MICRO-UND MOLECULAR BIOLOGY
- TOC ANALYSIS
- TYPE III WATER
- Production rate of Type III water is upto 10/PH with seven liter tank volume.
- Connection to municipal drinking water supply.
- Ultrapure water circulation right into the dispenser head.
- Easy to dispense water using the practical dispenser.
- Whisper mode.
- Rapid and Simple disinfection.
- Conductivity monitoring of pre-treatment module and ultrapure water.
- Simple module exchange via quick-release connections.
- Protective jacket at the end of the sterile filter.
- Extraction of Type III pure water also possible.
- Port of Dispatch: MUMBAI
- Delivery Time: 2 - 3 WEEKS